CHILLED BEAMS

Stacks Image 13332

Krantz Chilled beam DK-F, without ventilation function

ABOUT

For room cooling in the commercial sector, trade and industry, with high cooling capacity. Various installation options: above open ceilings, integrated into ceilings, in visible suspension from the concrete ceiling, or built into the chilled sails.​

FEATURES

- Standard cooling capacity up to 400 W/m
(B = 600 mm, H = 250 mm, measured following DIN 4715)
"Silent cooling" principle with heat, removal almost solely by way of convection
- Compact construction design and easy mounting
- Well suited for refitting

Downloads

Stacks Image 13402

Krantz Chilled beam DK-LIG/Z, with ventilation function, two-sided discharge

ABOUT

For room cooling and heating in commercial and industrial buildings. High cooling capacities; with fresh air supply to enhance the indoor air quality.
The secondary air is taken directly from the occupied zone. The supply air is discharged on two sides.
This chilled beam is designed for integration into any type of suspended ceiling. It can also be freely suspended, but then it requires so-called wings for stabilizing the air jets.​

FEATURES

- Compact unit for fresh air supply as well as for cooling and heating
– Model 300
Cooling capacity up to 620 W/m
Heating capacity up to 315 W/m
– Model 600
Cooling capacity up to 826 W/m
Heating capacity up to 352 W/m
- Reflow surface area for secondary air intake
- Many design options with various types of screens, wings, and connections to suspended ceilings
- Heat exchanger cleanable from room thanks to easily detachable screen
- Thanks to low height, well suited for low storeys in new or refurbished buildings
- Horizontal air distribution and low air velocities in the occupied zone
- Low sound power level
- Optimum layout possible thanks to various sizes of primary air nozzles

Downloads

Stacks Image 13460

Krantz Chilled beam DK-LIG/E, with ventilation function, one-sided discharge

ABOUT

For room cooling and heating in the commercial sector, trade and industry, for high cooling capacities and simultaneous fresh air supply to improve indoor air quality and humidity control. The secondary air is removed directly from occupied zone. The supply air is discharged on one side, which enables parallel placement to the facade or walls. This chilled beam is designed for integration into suspended ceilings made from metal, gypsum plasterboard, mineral fibres ect., or for downstanding installation.

FEATURES

- Compact unit for fresh air supply as well as for cooling and heating
- Primary air volume flow rate of 8 to 25 l/(s•m) [30 to 90 m³/(h•m)]
- Cooling capacity up to 620 W/m
- Heating capacity up to 315 W/m
- Reflow surface for secondary air integrated into the chilled beam; an extra reflow surface is thus no longer required in closed ceiling systems
- Many design options with various types of screens, wings and connections to suspended ceilings
- Heat exchanger cleanable from room thanks to easily detachable screen
- Thanks to low height, suitable for low storeys in new or refurbished buildings
- Horizontal air distribution with low velocities in the occupied zone
- Low sound power level

Downloads

Stacks Image 18507

High-capacity convective system LUVAS-D for cooling, for mounting below or flush with the ceiling

ABOUT

LUVAS high-capacity convective systems are modern solutions for cost-effective cooling and heating of spaces. Combining very high performance density and aesthetic design, they are an unobtrusive means of enhancing thermal comfort. In summer they provide refreshment, in winter the LUVAS profile systems for installation at inner facades and walls help meet the heat requirements and counter discomfortable cold air drop along facades. They can be used in conjunction with other air-conditioning systems. LUVAS systems are available either as ceiling systems or as profile systems for installation at inner facades and walls (see our product information “High-capacity convective system LUVAS-S, for cooling and heating for installation at inner facades and walls”).

FEATURES

- High-capacity cooling system for mounting below or flush with the ceiling
- High performance density despite low height
- Controlled air flow with optimum dynamic response
- Low height, thus most suitable for retrofitting in existing buildings
- Easy access to built-in parts facilitates cleaning
- Ease of mounting

Downloads

Stacks Image 18613

Krantz Chilled beam LuxCool

ABOUT

LuxCool is an innovative chilled beam developed by Krantz Components. It combines the proven technology of our ceiling induction units with a new design which can incorporate ceiling services such as lighting, presence detectors, etc. Thanks to sophisticated construction design LuxCool achieves high cooling and heating outputs at a low sound power level.​

FEATURES

- For cooling and heating
- Cooling output: 1 750 W for unit length (Delta Twater = 10 K, Delta Tair = 8 K)
- Heating output: 936 W for unit length (Delta Twater = 15 K)
- Fresh air supply
- Primary air volume flow rate 2.8 to 36 l/s [10 to 130 m³/h]
- Can incorporate ceiling services such as lighting, presence detectors, etc.
- Customized solutions
- Suitable for retrofit applications
- Compact unit
- Easy and quick installation

Downloads

Stacks Image 18712

Krantz Chilled beam DK-LIG-EW

ABOUT

For room cooling and heating in commercial buildings; designed for high cooling capacities along with fresh air supply to enhance the indoor air quality.
The secondary air is drawn directly from the occupied zone. The supply air is discharged below the ceiling.
This chilled beam is designed for wall or ceiling mounting. It is most suitable for hotel rooms, individual offices, or lobbies.

FEATURES

- Compact unit for fresh air supply as well as cooling and heating
– waterside cooling capacity up to 660 W/m
– waterside heating capacity up to 320 W/m
- Its low overall height makes it suitable for low floor-to-ceiling heights in new or refurbished buildings
- Low sound power level
- The range of primary air nozzles available enables optimum unit layout
- Simple installation

Downloads

  • Static cooling ceiling systems SKS-4/3 for concealed installation
  • Static cooling ceiling system SKS-4/3-duo for concealed installation
  • Static cooling ceiling system SKS 5/3 for visible installation

ON TWITTER
STAY IN TOUCH WITH OUR LATEST DEVELOPMENTS
Must be an email address
Thank you! Your submission was successfully sent :-)×
Opps! Some went wrong... Your submission did not go through :-(×