HIGH CAPACITY CEILING SYSTEMS

Stacks Image 13332

Krantz Static cooling ceiling system SKS-4/3, for concealed installation

ABOUT

High-capacity elements for installation above open, suspended ceilings; suitable for cooling all room types and applications but also usable for heating.​

FEATURES

- Standard cooling capacity 175 W/m² of cooling element suspended false ceiling (to DIN 4715)
- Suitable for high cooling capacities, as required in offices with high heat loads, television studios, technical rooms, or in the industrial sector
- Uses the retention capacity of the concrete ceiling
- Low temperature differences in the occupied zone
- Combinable with any air distribution system
- Cooling elements are independent of the false ceiling, so that mechanical installations can be carried out largely separately from ceiling construction
- Low installation height saves on building costs and makes this systems particularly suitable for renovation and refitting
- The basic element is copper serpentine pipework in one piece, thus no special requirements for chilled water quality; low system costs, long lifetime, assured quality, operating pressure up to 16 bar
- Good dynamic response
- No combustible components

Downloads

Stacks Image 13402

Krantz Static cooling ceiling system SKS-4/3-duo, for concealed installation

ABOUT

High-capacity elements for installation above open, suspended ceilings; suitable for cooling rooms of different types and uses, but also usable for heating.​

FEATURES

- Standard cooling capacity 216 W/m² of cooling element without suspended ceiling (with reference to DIN 4715), with high heat removal by convection and radiation
- Suitable for high cooling capacities, as required in offices with high heat loads, television studios, technical rooms, or in the industrial sector
- Uses the retention capacity of the concrete ceiling
- Design and installation of mechanical equipment and ceiling can largely occur separately
- Combinable with any air distribution system
- The basic element is copper serpentine pipework in one piece, thus long lifetime, assured quality, operating pressure up to 6 bars
- No combustible components

Downloads

Stacks Image 13460

Krantz Static cooling ceiling system SKS-5/3, for visible installation

ABOUT

High-capacity elements for installation as exposed ceiling elements with elegant panelling design. They can be used to make free-hanging chilled sails or chilled islands to be integrated into any type of suspended ceiling. This system is easy to combine with lighting and other ceiling utilities such as air outlets, sprinklers and loudspeakers.​

FEATURES

- Standard cooling output 160 W/m² of element if designed as a chilled sail (to DIN 4715); heat removal largely by radiation
- Suitable for rooms with cooling loads of up to 120 W/m² under comfortable conditions
- For both cooling and heating
- The system utilizes the storage capacity of the concrete slab
- Well suited for renovation and retrofit applications
- Special fin geometries and underside patterns easy to manufacture
- The core of the system is copper serpentine pipework in one piece, thus long lifetime and assured quality, operating pressure up to 6 bars
- No combustible components

Downloads

  • Static cooling ceiling systems SKS-4/3 for concealed installation
  • Static cooling ceiling system SKS-4/3-duo for concealed installation
  • Static cooling ceiling system SKS 5/3 for visible installation

ON TWITTER
STAY IN TOUCH WITH OUR LATEST DEVELOPMENTS
Must be an email address
Thank you! Your submission was successfully sent :-)×
Opps! Some went wrong... Your submission did not go through :-(×